[Elecraft] [Elecraft-K3] K3s SSB transmitting bandwidth?

[Michael Blake]

Bob, good information as was Don’s response but I am looking for a specific piece of information relative the actual response of a K3s on SSB using the stock 2.7KHz. filter and zero TX equalization.

Michael Blake
k9jri at mac.com <mailto:k9jri at icloud.com>






> On Dec 25, 2018, at 12:05 PM, W2XJ <w2xj at w2xj.net> wrote:
> 
> The rule for a balanced sound is that the product of the lowest and highest frequency should be between 450,000 and 500,000. So for a 2.7 KHz cutoff that means a low cut of 166 to 185 Hertz, or rounding that could be 200 Hertz. 
>> On Dec 25, 2018, at 8:03 AM, Michael Blake via Elecraft <elecraft at mailman.qth.net> wrote:
>> 
>> When using the stock K3s 2.7 KHz. roofing filter and all TX EQ settings are zero (0) what is the normal TX audio rolloff below 300Hz.?
>> 
>> Michael Blake
>> k9jri at mac.com <mailto:k9jri at icloud.com>
>> 
>> 
>> 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w2xj at w2xj.net
>> 
> 
> 
> -=-=-=-=-=-=-=-=-=-=-=-
> Groups.io Links: You receive all messages sent to this group.
> 
> View/Reply Online (#30275): https://groups.io/g/Elecraft-K3/message/30275
> Mute This Topic: https://groups.io/mt/28853370/243989
> Group Owner: Elecraft-K3+owner at groups.io
> Unsubscribe: https://groups.io/g/Elecraft-K3/leave/2016512/216803710/xyzzy  [k9jri at mac.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>