[Elecraft] K2 with KPA_100

[EricJ]

The EC2 is remarkably easy to clone. It's all straight cuts and four 
simple bends. I did it with the inexpensive Harbor Freight 8" 
shear/brake. The 2D connectors are simple and ingenious, but very very 
tedious to make. I just used long rails made from 1/4" square aluminum 
stock and tapped them for the 4-40 screws. Much easier to keep all the 
holes aligned

https://photos.app.goo.gl/kIbG8fpYGRHEUyzS2

I agree with Jim. "If you like to build, go for it!"

Eric KE6US


On 12/21/2018 9:19 AM, Jim KO5V wrote:
> Unfortunately, the EC2 enclosure is no longer available, so a future KPA100 will have to be mounted to the K2, and that does not allow the use of the KAT-2 tuner, but you could roll your own enclosure to get the "Twins". In that configuration, the K2 can have the KAT-2 installed, although I have two top covers and am currently using the unpopulated one with only the KIO2 and speaker installed.
>
> If you like to build, go for it!
>
> 73, Jim KO5V
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.csuf at gmail.com
>