[Elecraft] K3 Suddenly Putting Out Only 25 watts at 100 watts indicated
Rick WA6NHC
wa6nhc at gmail.com
Wed Dec 12 16:26:16 EST 2018
Make sure the dummy load is connected; the cable is 'good'; that you are
not routing the serial data via the P3 (as if you were updating
firmware; there is sometimes a slight stumble in communications
otherwise) and that your supply is giving appropriate voltages under load.
Try this a few times, it sometimes needs that to pass. Once it passes,
save that config, then make sure it passes again. And again until
you're satisfied.
Then check the power out at 100W.
Failing that, time to call support.
Rick nhc
On 12/12/2018 1:09 PM, N4ZR wrote:
> Ran the TX Gain calibration from the K3 Utility and it failed on 160
> and 80, then aborted because power readings did not converge
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network
> at <http://reversebeacon.net>, now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.
>
> On 12/12/2018 3:40 PM, K9ZTV wrote:
>> Pete ...
>>
>> The K3 is capable of power output on a per-band basis. Any chance you
>> have it set for 25 watts on ten meters?
>>
>> 73,
>>
>> Kent K9ZTV
>>
>>> On Dec 12, 2018, at 1:47 PM, N4ZR <n4zr at comcast.net> wrote:
>>>
>>> Transmitted on my K3 for the first time since the 10-meter contest,
>>> and it is only showing 25 watts out on the built-in meter into a
>>> dummy load. Power output setting of the K3 is 100W, and same results
>>> seen on all bands. What could possibly be going on here? Back to
>>> Watsonville?
>>>
>>> The cruel karma of it all is that *yesterday* I ordered a KPA-1500.
>>>
>>> --
>>> 73, Pete N4ZR
>>> Check out the Reverse Beacon Network
>>> at <http://reversebeacon.net>, now
>>> spotting RTTY activity worldwide.
>>> For spots, please use your favorite
>>> "retail" DX cluster.
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k9ztv at socket.net
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4zr at comcast.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6nhc at gmail.com
More information about the Elecraft
mailing list