[Elecraft] KX3 has died

[Walter Underwood]

That is the procedure for forcing a firmware load on page 25 of the manual.

ftp://ftp.elecraft.com/KX3/Manuals%20Downloads/E740163%20KX3%20Owner%27s%20man%20Rev%20C5.pdf <ftp://ftp.elecraft.com/KX3/Manuals%20Downloads/E740163%20KX3%20Owner's%20man%20Rev%20C5.pdf>

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Dec 9, 2018, at 7:20 PM, Bob N3MNT <bob at hogbytes.com> wrote:
> 
> If you have batteries in the KX3.  Remove one so it has no battery power. 
> Reboot the Mac .  Some time when an operation using the usb/serial ports
> hangs, the machine does not release the port.  Rebooting the pc/Mac should
> release everything and you can try again.  Did you use check Elecraft
> website for latest firmware to get the update.
> 
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org