[Elecraft] AM operation of the K line

[Mark Musick]

Or the 13 kHz filter. Both the 6 and 13 kHz filters can be used for AM.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Bob McGraw K4TAX
Sent: Monday, December 10, 2018 01:09
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] AM operation of the K line

Sure, works great.  As configured for SSB switching to AM mode runs about 125 watts of carrier from the KPA500.   No different than operating SSB, just switch the K3S to AM.   Must have the 6 kHz filter installed.

73

Bob, K4TAX


On 12/9/2018 4:03 PM, Michael Blake via Elecraft wrote:
> Anyone have any experiences or suggestions for using the K3s, KPA500 and KAT500 on 80 meter AM?
>
> 73 - Mike - K9JRI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to markmusick at outlook.com