[Elecraft] External Display Freezes after Delay

[Don Wilhelm]

Terry,

Since you built the P3 you should have no fear of going inside it.
Check all the connections for the SVGA option and make certain the 
cables are dressed as indicated in the manual and the connectors fully 
seated.

73,
Don W3FPR

On 12/9/2018 9:54 AM, brenntl wrote:
> I have a nuisance issue with the P3 and an external display. When I apply
> 13.8VDC to the K3 and P3 simultaneously (P3 POWER button must be pushed to
> turn on the P3), the external display displays the image first followed by
> the image on the P3. This all appears to be normal operation.
> Thirty seconds after the image appears on the external display, the display
> image freezes and remains frozen and the image on the P3 remains normal. If
> I then turn the P3 POWER BUTTON off for a few seconds and then turn it back
> on, the image reappears and remains working on the P3 and the external
> monitor until I power the whole system down. This sequence of events is very
> repeatable, including the time it takes the external display to freeze, and
> has done this since I first built the P3.