[Elecraft] Bad tx audio.

[Bob McGraw K4TAX]

Define "crappy audio"?   Distorted, thin, muffled, humm, buzz, noisy, scratchy, bassy .......

Some could be radio adjustments, some could be component failure, some bad mike, some could be power supply, some could be power cables/connectors, and ?????

Bob, K4TAX


Sent from my iPhone

> On Dec 6, 2018, at 6:20 PM, Dick Frey <k4xu.1268 at gmail.com> wrote:
> 
> I had several "Bad Audio" reports in SS. One I can Ignore, more than that I
> believe.
> 
> I have a K3 with the recorder.  To test it, I ran the K3 into a dummy load
> and listened to the tx signal on another receiver. The resulting signal was
> indeed crappy both with the mic and on recording.
> I reduced power to almost nil, changed mics, removed all other connections
> to the rig except power coax and mic. Still had lousy audio.
> 
> What am I missing?
> 
> -- 
> Dick - K4XU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>