[Elecraft] KX3 drifting downwards

[John Flynn]

Yep. That's what worked for me, thanks to an earlier poster.

73,

John K4ARQ

On Wed, Dec 5, 2018, 11:18 Mark Goldberg <marklgoldberg at gmail.com wrote:

> What is your menu setting for MIC BTN? If it is set to UP.DN and used with
> a non Elecraft mic without up/down buttons, it may trigger the frequency
> change. Try changing the setting to PTT.
>
> 73,
>
> Mark
> W7MLG
>
>
> On Wed, Dec 5, 2018 at 6:41 AM André .. <on7yk at hotmail.com> wrote:
>
> > Hello to everyone .
> >
> > I have a brandnew KX3 and have the following problem .
> >
> > Using the KX3 in SSB or CW mode then he start to drift downwards with
> 1Khz
> > almost every time when the KX3 going in TX mode  (push the mic or
> footswith
> > or  the keyer ) .
> >
> >
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gio.flynn at gmail.com