[Elecraft] Bose QC35 headphones impedance

[Gary Smith]

Hi Frank,

Thanks, that was it. I appreciate the 
help. 

Now back to the 160 contest with better 
condx!

73,

Gary
KA1J

> Hi Gary,
> 
> Set your K3 AFGain parameter to Low.  It sounds like it's set to High
> 
> 73
> Frank
> W3LPL
> 
> ----- Original Message -----
> From: Gary Smith <Gary at ka1j.com>
> To: elecraft at mailman.qth.net
> Sent: Sat, 01 Dec 2018 23:28:26 -0500 (EST)
> Subject: [Elecraft] Bose QC35 headphones impedance
> 
> My QC15 headsets bit the dust and Bose 
> gave me a great price on a new one with 
> exchange. The QC15 had a modular plug with 
> an option for high/low impedance and it 
> allowed the headsets to work beautifully 
> with the K3/K3s This QC35 while much 
> better than the QC15, has no option to 
> change the value and the AF blasts 
> through. I cannot turn the volume barely 
> at all and it's too loud. A monitor 
> setting of 3 for CW is almost too loud.
> 
> I looked in the owners manual but didn't 
> see a configuration option to elect that 
> from the software. Have I missed the 
> obvious again?
> 
> Thanks & 73,
> 
> Gary
> KA1J
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donovanf at starpower.net
> 
>