[Elecraft] K3S fsk with usb

[Peter W2IRT]

I went a similar route with a MicroKeyer MK-II. Does the job very well, but it
makes disconnecting and re-connecting the radio a cast iron bear of a job. I
really want to replace the MK-II with another (simpler) solution for FSK, CW
keying, SSB voice file sequencing and CAT control, and was thinking the
combination of a Y-box and an S-box-USB would do the job. The problem being the
MK-II is RFI-susceptible, and the software has eaten itself on several occasions
over the past few years.

 - pjd


-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net]
On Behalf Of AB4IQ
Sent: Thursday, August 30, 2018 9:04 PM
To: 'Nr4c'; 'Richard Ferch'
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3S fsk with usb

I have a RigExpert TI-8 and Cable for the K3S that I bought new that does
FSK with a built in Winkeyer as well.  I thought I would use it on the K3S
but instead I just went the USB route and do AFSK.  It's still setting in
the box looking lonely.  I also have cables for the Ten Tec Orion II, and
Kenwood 590SG which I have parted with recently and probably need to get rid
of this much needed (Ya Right) stuff.  Hi..

The USB route was the simplest and does all of the sound card modes.

Ed.. AB4IQ