[Elecraft] K2 power setting issue

[Chris]

My second K2 has some issue with output power.  The power is set at 1.0W
but is measured at over 10W at the dummy load.  When I set the power to a
little higher, I get 'Hi Cur' message but it goes away after a second.

CAL CUR is set at 2.5A, and the modulation seems OK when I hear from other
receivers.  The max output with the pot all the way up is about 14W, so I
think the final is fine.

Any info is appreciated.  Thanks.

Chris AD1AD