[Elecraft] K-POD labels

[dgb]

I used the adhesive backed 12mm wide tape from an old Brother P-Touch on 
small print which is about 1/8 of an inch. I then cut them down to about 
3/16 width by 2-1/2" long. I put one on each side of each row of F keys. 
It's the same tape I use for labeling all the cables in the shack.

73 Dwight NS9I

On 8/28/2018 3:51 AM, IK4EWX wrote:
> Somebody has well solved the problem of labeling clearly the F-Keys on the
> K-POD?
> How?
> I am interested to use a clean and clear way of labelling the K-Pod
> commands.
> Thanks.
> Ian - IK4EWX
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ns9i at bayland.net
>
>