[Elecraft] New speaker box for the shack

[Bill]

I have decided to get away from the Behringer amplified speakers and 
build a box with a Lanzar subwoofer (6.5 inch - 105 to 12k - 94 db 
sensitivity - 8 Ohm) for HF and several 3" speakers for the assorted 
VHF/scanners etc.. The box will be sealed and I may partition the 
smaller speakers into their own compartment. For the smaller speakers, I 
am looking at the 3" DROK (15W - 108 to 20k - 8 Ohm - 90db sensitivity) 
- although I an not above using something cheaper (due to their planned 
usage).

Nothing fancy for the entire project. The primary speaker will be 
switched between the K3 and another rig, as needed. Both rigs are recent 
and are loaded with EQs etc. If I run into a hiss problem, I should be 
able to eliminate it by using a condenser or two across the inputs to 
knock out offending highs.

The initial reason for the Behringers was to remove offending hiss, 
which they do well. Now, I am looking for a simplier solution - with 
less controls and less wires. Hence, a single speaker box for 
everything. Needless to say, I do have a good shop. My K3 does not have 
a second RX and never will. I rag chew - no DX or contesting.

I have avoided the metal box speakers from the various big names (IKY) - 
too expensive for that they are and I do need matching anything.

Suggestions and comments would be most welcome.

Thanks,

Bill W2BLC