[Elecraft] P3 config file - was utilities on Linux

[dick at elecraft.com]

The P3 can restore a config saved from another P3.  

Some of our other devices (K3, KX3...) won't do cross-serial-number config
restore if there is per-unit calibration data that would require any
significant work to re-create.

The saved-from serial # is in the configuration file, but it currently is
not used to inhibit cross-P3 restore.

If the P3 Utility cannot get through the initial connection sequence from a
P3 (read its firmware version, serial #, etc), the Config Restore button
won't be enabled.  The P3 Utility can't restore a configuration if it can't
get reasonable P3-like responses from P3 installed firmware. I'm trying to
avoid restoring a P3 configuration into a K3 or KPA500 with the P3 Utility.

73 de Dick, K6KR

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of TL_Netvision
Sent: Wednesday, August 22, 2018 23:11
To: elecraft at mailman.qth.net
Subject: [Elecraft] P3 config file - was utilities on Linux

Hello,

Speaking of configuration files, I wander if I's feasible to restore my P3
from someone else's file (In hope it's not serial-number dependent etc.).

I have a P3 (MCU 1.29, no SVGA option) for which all P3 utilities I tried
(current & earlier) fail  uploading firmware, and  don't enable Save \
Restore options.  
Would  the Restore option be enabled again had the P3 utility recognized a
valid configuration file in the library? 

I will be glad to test with someone's file . 

TIA, Isaac,
4Z1TL


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com