[Elecraft] KPA1500 WAKE ON LAN problem

[Hisashi T Fujinaka]

I've been told you need to wake the thing up with a bunch of semicolons.
Also, Wake-on-LAN is a directed special packet that maybe is not going
over the wire correctly?

My KPA1500 is near my K3, so I've been using the K3/K3S rear panel 12V
DC OUT RCA connector to the KPA1500 REM RCA connector to wake it up.

On Wed, 15 Aug 2018, Paul Baldock wrote:

> I 'm controlling my KPA1500 over the LAN. The LAN connection is via a 
> WIFI/ETHERNET bridge. I have WAKE ON LAN ENABLED.
>
> If the power on the KPA1500 front panel is OFF, LOCAL CONNECT will 
> occasionally not find the KPA. This problem appears to occur after a long 
> disconnect such as over night. Turning the power on by hand fixes the 
> problem.
>
> Has anybody else experienced this?
>
> Everything works as it should if I use the USB interface.
>
> It appears that WAKE ON LAN does not always work.

-- 
Hisashi T Fujinaka - htodd at twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee