[Elecraft] Noise cancelling headphones

[Michael Blake]

I also used a QC15 and then moved to the QC25 and found that either is a very comfortable headset to wear for long periods of time.  The little microphone that “dangles” in the cord actually works quite well with both the K3s and KX3 in most surroundings.  All that it requires is a good TRRS jack to two TRS male plugs adapter.

 I have tried a couple of the add on boom mics but I prefer to use my desk microphone (Shure SM57 or EV RE50N/D B) most of the time. 

Very 73 - Mike - K9JRI






> On Aug 10, 2018, at 12:20 PM, Mike Kasrich <aj9c at indy.rr.com> wrote:
> 
> I've used the QC-15 and the are good. I had a headset buddy but the boom was "limp" it worked. I have a Uflymic for the QC15 if anyone has an interest.
> 
> 
> My choice now is the Bose QC25 and modmic by Antlion.  The QC25 has been replaced by the QC35 so you can get a "25" in an affordable range.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9jri at mac.com