[Elecraft] HRD slow accessing K3 frequency controls

[Don Wilhelm]

Bill,

Have you looked at the RS232 menu to check the baud rate?
If you have a P3 check that too.
Set it for 38400.

73,
Don W3FPR

On 8/8/2018 4:34 PM, Bill wrote:
> Suddenly, HRD is no longer working with my K3:
> 
> Using my K3, I initially click on a favorite - the rig responds 
> immediately. After a few seconds (less than 10), I click on another 
> favorite and there will be a multi-second delay (about 6 or 7 seconds) 
> before the change takes place. Changing bands is similar delayed.
>