[Elecraft] KPA1500 Client/Server Software

[Rick Tavan]

Not sure what you want to do here, but when running KPA1500 Remote in its
client/server configuration you can make control changes and monitor the
amp via either the client or the server instance, running on different
computers, and they follow each other. I've seen no discrepancies. In my
shack, the server instance is connected to the amp via USB and connects to
the client instance via Ethernet across the LAN or WAN. For me, the
simultaneous operation characteristic is just a curiosity - if I'm in the
shack, I use either the physical control panel or the USB-connected
instance of KPA1500 Remote. If I'm operating remotely, I use the client
instance running on my local computer. So I only see and play with the dual
access capability when I'm in the shack (the "radio site") and
experimenting with the configuration.

73,

/Rick N6XI

--

Rick Tavan
Truckee, CA

On Mon, Aug 6, 2018 at 1:06 PM, Paul Baldock <paul at paulbaldock.com> wrote:

> At 03:59 PM 8/6/2018, you wrote:
>
>> The KPA1500 Remote s/w, which should be on our website later this week,
>> supports both a local operation via direct connection via USB or ethernet
>> to the amp.
>>
>
> Will I be able to control the KPA1500 using 2 different programs
> simultaneously, one talking via Ethernet and one via USB, without conflict?
>
> - Paul  KW7Y
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rtavan at gmail.com
>