[Elecraft] K3 - Persistent channel hopping on a band

[Fred Jensen]

Yes, and Yes, and when I do "M>V", look for memory channel 51, and then 
"M>V" again, it all works as advertised.  If I move to 30 meters, and 
then come back, I have to do the above 3 step sequence to get back into 
channel hopping. Manual says to cancel channel hopping by tapping RATE 
or FINE, which works.  But, if I change bands and then come back, 
channel hopping is canceled even though I didn't tap RATE or FINE.

I don't believe this is a bug.  What I was hoping for was to return to 
channel hopping whenever I go to 5 MHz with the BAND button until I 
cancel it like the manual says.  I'm finding more CW Q's lately on the 5 
MHz channels.

As I said, this is not worthy of a lot of effort, it would just be a 
nice featurette.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 8/6/2018 6:54 PM, Don Wilhelm wrote:
> Skip,
>
> Are all the memories for the channel hopping in adjacent memory 
> locations?  Do you have an "*" in the beginning of the text field?
>
> My channel hopping frequencies for 60 meters have been set up for 
> years and have not changed, and as you can imagine, I have changed 
> bands many times since I set it up.
>
> 73,
> Don W3FPR