[Elecraft] KPA-1500 Power Supply Cable Size

[Mike Maloney]

Okay have looked over the posts, but somehow have missed the actual AWG(American wire gage) SIZE of the stock DC pair?   Anyone KNOW this or maybe even micro-ohm tested (a long shot) it?  Voltage drop (ps to amp) divided by full load dc amps would be close enough. 
73, 
Mike  AC5P  

    On Tuesday, July 31, 2018 5:44 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
 

 On 7/31/2018 2:40 PM, K8ZCT wrote:
> Jim,
>
> Please accept my apologies.
>
> Sorry for giving you Kudo's for the wrong Handbook. I should have stated that you are are a contributor to the 2018 Edition of "The ARRL Handbook". I have many of your articles and to be honest the ARRL "Grounding Book" has a lot of information that is also in the National Electrical Code and IEEE "Green Book".

I also made major contributions to N0AX's ARRL Gounding Book -- much of 
it is based on the Power and Grounding slide show talk that's on my 
website.  And some of what I've written is from the IEEE Green and 
Emerald Books."

> I worked in industry for over 40 years in the power systems distribution
> area, and I was an active member of  the IEEE IAS Power Systems Reliability
> Subcommittee.

The last 25 years of my work life was as a consultant designing large 
sound systems for public buildings -- theaters, stadiums, churches, jazz 
clubs, even the United Terminal at O'Hare.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ac5p at sbcglobal.net