[Elecraft] How far can the KPA1500 amp be from the PS?

Dave AD6A dave at ad6a.com
Sat Apr 28 10:55:18 EDT 2018


Why not just use the amp as-is near the 220V outlet and run longer RF coax cables to the amp from your operating position?

Dave
AD6A

Sent from my  iPhone X

On Apr 28, 2018, at 6:54 AM, Dauer, Edward <edauer at law.du.edu> wrote:

The KPA1500 Manual states that “the power supply can be operated remotely” and that the supplied cables are 66 inches long.  It does not say how far apart, beyond the 66 inches, the PS and the amp can be without affecting performance or creating other issues.  

Does anyone know?  There are apparently three cables – the main HV, the 15-pin control, and the 12VDC phono plug cable for remote turn-on of the amp.

I am thinking about buying a KPA1500 but may have trouble bringing 220 VAC into the shack.  One electrician I hired long ago to look at the question told me it could not be done in an aesthetically acceptable way given the nature of the construction of the basement walls where the station is.  That's why I bought the KPA500 rather than a KW amp at the time. There is a 220 VAC outlet in another room on another floor of the house, which might allow me to lay some long cables while I am trying to figure out how to get 220 into the shack.  It is used to power the cook-top so the current capacity is likely sufficient - which I check by looking at the breakers. 

The tripping hazard of doing this might itself be unacceptable, but I’d like to think about it.  The other possibility would be using a 220 VAC extension cord and locating the PS in the shack itself, but that seems even more dangerous . . . 

Thoughts, anyone?

Thanks, as always,

Ted, KN1CBR            

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dave at ad6a.com


More information about the Elecraft mailing list