[Elecraft] PX3 computer interface to KX3

[John_N1JM]

Is the *host serial port baud rate* set correctly in the PX3?

John N1JM


Bill Frantz wrote
> I'm sitting in New Hampshire and I find I can't get my computer 
> to talk to the KX3 when it goes through the PX3 using the 
> ACC1-PC jack. The computer can talk to the KX3 when plugged in 
> directly to ACC1 jack on the KX3, and the PX3 can get the 
> frequency data when plugged into the same jack.
> 
> I have the same problem with both wsjt-x and RUMlogNG, so I 
> don't think the problem is in the computer software. The USB 
> <--> RS232 seems to be working, so I suspect the PX3.
> 
> Does anyone have any suggestions for something to fix to get 
> both the computer and the PX3 to talk to the KX3? (I'm low on 
> test equipment here, but I do have a DVM.)
> 
> Thanks - Bill AE6JV
> 
> -----------------------------------------------------------------------
> Bill Frantz        | Concurrency is hard. 12 out  | Periwinkle
> (408)356-8506      | 10 programmers get it wrong. | 16345 
> Englewood Ave
> www.pwpconsult.com |                - Jeff Frantz | Los Gatos, 
> CA 95032
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791 at .nabble





--
Sent from: http://elecraft.365791.n2.nabble.com/