[Elecraft] PX3 reset....

[Tom Francis, W1TEF]

Thanks very much - I've fiddled around with the settings so much, I've 
gotten
lost. :-)

Best regards,

Tom, W1TEF

On 4/25/2018 8:25 AM, Bob N3MNT wrote:
> Turn PX3 off ( using switch on PX3)
> Hold the Labels key and tap PWR ( Hold labels for 2 secs then release)
> You should see Configuration reset
>
>
> WARNING:  This will erase any parameters you have stored in the PX3.
> Before doing this write down any parameters you may want to save so they can
> be reentered.
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kx2_kx3 at swsports.org
>