[Elecraft] K 3 Sub receive no audio

[Jessie Oberreuter]

      A "swish noise with no audio" sounds exactly like what my factory 
installed sub rx sounded like in diversity mode.  Turned out the 
associated VFO cable was pluggined into the wrong port on the one of the 
vertical boards behind the front panel. There are two VFO sources (one for 
independent VFO, one for a second drop of the primary VFO).  Check the 
wiring.


On Wed, 18 Apr 2018, JAY wrote:

> Thanks to all for the suggestions. I have now discovered that I am RX fine
> on the Main. On the SUB all i get is a swish noise no audio.
> Thanks again in advance
>
> 73
> Jay KI4TXP
>
> On Wed, Apr 18, 2018 at 11:40 AM, JAY <ki4txp at gmail.com> wrote:
>
>> I do not get any signals when I turn on the sub rx. I get main rx on both
>> sides of headphones. It has to be a setting that I am missing. I do get a
>> steady sound but no audio. Thanks in advance.
>>
>> --
>> 73
>>
>> KI4TXP  JAY
>>
>
>
>
> -- 
> 73
>
> KI4TXP  JAY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to joberreu-elecraft at moselle.com
>