[Elecraft] Issue 12 re Astron Power Supply

[hawley, charles j jr]

About 75% went thru the ground path. The 10 ga to the rig went from Astron to a battery switching device in case of power outage, to rig runner and to rig. So 4 sets of power pole connectors plus 2 fuses. I’m thinking of changing some of that too. The voltage at the rig, K3, now drops a volt when putting out 100 Watts.

Chuck Jack 
KE9UW

Sent from my iPhone, cjack 

> On Apr 16, 2018, at 3:14 PM, Wes Stewart <wes_n7ws at triconet.org> wrote:
> 
> I would hope that "much of the current..." wasn't really much.  The direct conductor from the negative terminal of the power supply to the radio should carry the majority of the supply current,
> 
> Wes  N7WS
> 
>>  On 4/15/2018 7:38 PM, hawley, charles j jr wrote:
>> This thread prompted me to check out my Astron vs35m. It had a small black wire from -V connected to the bottom of the chassis. Perhaps it could be called a case or cabinet...more importantly, it’s what the green wire from the line cord is connected to. I disconnected the black wire. When it was connected, much of the current that would have passed thru the negative power wire from the power supply to the rig was shunted thru the green power cord wire, the ground buss bar, and other ground connections.
>> 
>> Chuck Jack
>> KE9UW
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c-hawley at illinois.edu