[Elecraft] W2 failure

[Michael Eberle]

Seems like I had a power connector issue with mine once. Using a 
different power cable took care of it.
One of the sensor lights should be lit.  If no sensors are connected the 
S1 and S2 lights will alternately flash.

Mike
KI0HA

On 4/13/2018 17:59, Chris Tate - N6WM wrote:
> Ya.. it doesn't even get that far..
>
> -----Original Message-----
> From: Bill Johnson <k9yeq at live.com>
> Sent: Friday, April 13, 2018 3:13 PM
> To: Chris Tate - N6WM <ctate at ewnetinc.com>; elecraft at mailman.qth.net
> Subject: RE: W2 failure
>
> Do you have the correct sensor on?
>
> 72 & 73,
> Bill
> K9YEQ
> FT'er for K2, KX1, KX3, KXPA100,  KAT500, W2, etc.
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Chris Tate - N6WM
> Sent: Friday, April 13, 2018 5:07 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] W2 failure
>
> I have a W2 wattmeter that seems to have failed.  its powers up (leds flash on for a moment) but then almost immediately shuts down.  any thoughts on what may be on the blink or something that I can look at?
>
> Chris
> N6WM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mteberle at mchsi.com
>