[Elecraft] K3 Apparent PA failure ?
Tom
tomb18 at videotron.ca
Mon Apr 9 13:25:53 EDT 2018
Hi,
Is it possible that menu "Tune PWR" is set to 0?
Tom
-----Original Message-----
From: Martin Sole
Sent: Monday, April 9, 2018 12:35 PM
To: k4to at arrl.net
Cc: Elecraft Discussion List
Subject: Re: [Elecraft] K3 Apparent PA failure ?
I’m pressing TUNE. Mode VOX etc shouldn’t matter.
Martin, HS0ZED
Sent from my iPad
> On 9 Apr 2018, at 23:32, Dave Sublette <k4to.dave at gmail.com> wrote:
>
> Are you in CW mode? If so, is VOX enabled?
>
> K4TO
>
>> On Mon, Apr 9, 2018 at 12:20 PM, Martin Sole <hs0zed at gmail.com> wrote:
>> Not in test mode :(
>>
>> I get the red TX led bit the display show 0w and - - where the VSWR
>> display would be when I press TUNE in TX NORM.
>>
>> Martin, HS0ZED
>>
>>
>>
>>> On 09/04/2018 22:56, Dave Cole (NK7Z) wrote:
>>> Press and hold the right side of the band-switch over "Test" and make
>>> sure you are not in test mode.
>>>
>>> You should see the words:
>>>
>>> "TX TEST"
>>>
>>> or
>>>
>>> "TX NORMAL"
>>>
>>> It should say "TX NORMAL".
>>>
>>> 73s and thanks,
>>> Dave
>>> NK7Z
>>> https://www.nk7z.net
>>>
>>>> On 04/09/2018 08:31 AM, Martin Sole wrote:
>>>> Hi,
>>>>
>>>> My K3 died today, somehow. The radio works fine on receive and appears
>>>> to transmit just there is no power indication on my external meter or
>>>> on the front panel when pressing TUNE. There is ALC indication but no
>>>> power out indication.The only thing I did different was to switch off
>>>> the supply before the radio, something I normally never do. Having
>>>> noted others having issues with that I reloaded the firmware. Still no
>>>> output. Starting to think that somehow the PA is fried or possibly the
>>>> driver as there is nothing from the 10 watt PA either. Tried turning
>>>> the power down and putting the KPA3 into bypass. Still no power output.
>>>> Not sure what else to try before I tear into it. Was going great,
>>>> worked 3B7A on 3 bands today no problem.
>>>>
>>>> Suggestions appreciated.
>>>>
>>>> Thanks
>>>> Martin, HS0ZED
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to dave at nk7z.net
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to hs0zed at gmail.com
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k4to at arrl.net
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the Elecraft
mailing list