[Elecraft] K3 audio line in/out cables

Thu Apr 5 07:19:17 EDT 2018

Thx Bob
N2TK, Tony

Sent from my iPhone

> On Apr 4, 2018, at 10:17 PM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
> 
> Tony:
> 
> Only need one USB cable  between the radio and computer.  Audio TO/FROM and CAT commands are handled over one cable.  Works great!   If you plug anything into the rear Line, it will disconnect the audio via the USB cable.
> 
> 73
> 
> Bob, K4TAX
> 
> K3S  s/n 10163
> 
> 
> 
>> On 4/4/2018 8:17 AM, elecraft-request at mailman.qth.net wrote:
>> Message: 4
>> Date: Tue, 3 Apr 2018 12:20:02 -0400
>> From: "N2TK, Tony"<tony.kaz at verizon.net>
>> To:<Elecraft at mailman.qth.net>
>> Subject: [Elecraft] K3 audio  line in/out cables
>> Message-ID:<[email protected]>
>> Content-Type: text/plain;    charset="us-ascii"
>> 
>> I have upgraded both of my K3's to make them as close to a K3S as best I
>> can. Presently cleaning up the rats nest of cables. I am using USB.
>> 
>> I no longer use the Line IN and OUT jacks.  Presently only using FSK. I plan
>> on adding FT8 shortly. With the on board CODECs is there any reason I still
>> need the LINE cables? Want to check to makes sure I am not missing
>> something.
>> 
>> 73,
>> 
>> N2TK, Tony
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tony.kaz at verizon.net