[Elecraft] Low RX and Zedro Watts output after KIO3 board substitution

[Marcel Jorba]

 Don,
You are a wizard.
The K3 is up and running again
Thanks!
Marcel EA3IN/KC1AEU
    On Monday, April 2, 2018, 8:25:26 PM GMT+2, Don Wilhelm <donwilh at embarqmail.com> wrote:  
 
 Marcel,

Double check the plugging of the connectors between the RF board and the 
KIO3 board.  Unfortunately, you will have to disassemble things to be 
able to see the mating of the connectors.

73,
Don W3FPR

On 4/2/2018 12:57 PM, Marcel Jorba via Elecraft wrote:
> Hi
> My K3 (s/n 3871) experiments low RX and 0W output (when pressing the TUNE button) with -- as SWR measureNo SSB or CW output power
> It hapenned after I substituted the original KIO3 board by a spare one I bought to a ham (the aim was to solve an ols no speaker audio aout problem)
> I have the KXV3 installed at the factory