[Elecraft] Control K3 sub RX with local K3/0 mini

[Oliver Großmann]

He everyone,

this is a kind of an additional feature request regarding K3 and K3/0 mini firmware. Due to the fact the K-Pod can control the K3(s) over the production interface and the K3 can be controlled by an K3/0 mini over the UART Interface. An idea came up for improved SO2V operation if an K3/0 mini is available like in my case.

If an crossed cable between production interface of K3/0 and K3(s) is used to interface the K3(s) by an K3/0 mini and the FW enables the possibility to use all "BSET" features on the K3/0 including displaying frequencies of Sub-Rx I can imagine this will improve SO2V operation dramatically. So Idea is Main Receiver and TX settings on K3 on left side of the table and K3/0 mini on the right side of the table and controlling Sub-Rx including filter etc.

Just an idea which I had in mind for several days.

Best regards,

Olli, DH2WQ

-- 
------------------------------------------------------------------------
Oliver Grossmann | DH2WQ | oliver.grossmann at bretzi.de