[Elecraft] turn off SSB monitor on Line Out?

[Cady, Fred]

I'll bet it could be made mode specific.


________________________________
From: Wayne, W5XD <w5xd at writelog.com>
Sent: Sunday, September 24, 2017 5:12 PM
To: elecraft at mailman.qth.net
Cc: Cady, Fred
Subject: Re: [Elecraft] turn off SSB monitor on Line Out?


Wow, that was a quick answer.  The good news is that it eliminates the problem of "my own voice in my headphones" when operating SSB. The bad news is that it also eliminates CW sidetone. I am going to try it at "T=1" and see if I can hear the sidetone when I want it, and ignore my voice when I don't.


Related question:
I am new to the K3. I thought I read the manual. There is some reference material somewhere that I obviously have not read. Is there a URL for this hint? K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017


On 9/24/2017 22:51, Cady, Fred wrote:

Hi,
K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017


* TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, tap '2'  (REV switch) to set the "T=" level (TX monitor). Tap '2' again to return to the RX LINE OUT setting.


I haven't tried it but I would guess you just adjust it to zero.

cheers,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com>


________________________________
From: elecraft-bounces at mailman.qth.net<mailto:elecraft-bounces at mailman.qth.net> <elecraft-bounces at mailman.qth.net><mailto:elecraft-bounces at mailman.qth.net> on behalf of w5xd <w5xd at writelog.com><mailto:w5xd at writelog.com>
Sent: Sunday, September 24, 2017 2:52 PM
To: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net>
Subject: [Elecraft] turn off SSB monitor on Line Out?

Is there a menu entry to turn off the SSB monitor on Line Out?
My (recent vintage K3S) rig seems to put my voice on Line Out regardless of
the front panel Monitor setting. I see in the manual a reference to
Config:Lin Out=PHONES but, the best I can tell, my rig has no such setting
in Lin Out (all I have are numeric settings). Its probably not the answer,
but the mismatch between the manual and what I understand of the rig tells
me there might be something important I have not learned.

Why do I care?
I do headphone switching in software--multiple radio audio channels and mic
audio are routed to a software mixer which reads those, and writes multiple
channels to headphones and to a long term WAV file recording. I would prefer
to use the USB Windows Recording device as the "received audio" input to
this mixer. But, for now, I am using an analog cable from the "Speaker" jack
on the K3S back panel to a sound card because that is the only way I have
found to turn off the "monitor" function. That is, when I use the
all-digital path, I hear my own voice in my headphones and my brain just
won't deal with that gracefully.




--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu<mailto:fcady at montana.edu>