[Elecraft] KX2 built in mic

[Wayne Burdick]

Dan,

You may have been pressing and holding XMIT, which goes into TUNE mode (CW). You just need to *tap* XMIT to go into voice transmit, then tap it again to exit. It doesn’t act like a PTT switch.

73,
Wayne
N6KR


> On Sep 23, 2017, at 10:52 PM, Dan Presley <n7cqr at arrl.net> wrote:
> 
> I was doing the SOTA ‘S2S’ summit to summit party today from Oregon, and had the KX2 going. I almost always do CW, but with little success I switched to SSB as there were a few guys on. Don’t believe I’ve ever made a voice Q with this rig.. Of course I forgot the mic, but I figured I could use the built in one. The problem was that everytime I transmitted (pressing ‘XMIT’) in the mode window it would switch to CW and back to USB as I released it.I thought it might be the CW in SSB setting, allowing CW to be sent while in SSB mode so I changed the menu setting in CW Weight, but it still continued to show the same in the mode window. And-never did get a Q. Of course it might have been working and they never heard me, but any ideas why that might be occurring? Though conditions were lousy I did get to meet N4EX, the top SOTA chaser in North America, who I’ve worked before from his home state of NC. He was out here visiting his son. To me the KX2 is the perfect SOTA radio.
> Dan Presley  N7CQR
> n7cqr at arrl.net
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com