[Elecraft] K3/0 TO K3 NOT WORKING?

[Fred Jensen]

When you power your K3/0 down, does the remote K3 turn all the way off 
[i.e. go totally dark]?

Who is beeping -- K3/0 or RRC?  Control-end or remote-end?

Does it do this *every* time [i.e. totally repeatable]?

Is your control path *really* "through the Internet ... IAW does your 
remote-end RRC have an IP address outside the sub-net the control-end 
RRC is on? ... or are they both DHCP-assigned by your router?

The control-end RRC will beep at you [out the SP jack to whatever is 
plugged into it] if the remote-end RRC/K3 is already on.  It's a busy 
signal to another user.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 9/23/2017 5:58 AM, Waynetheking wrote:
> Having Trouble with my K3/0 Remote Station.
>
> For the last week 9/18 thru 19/23 I turn on the supply and then the K3/0 and
> the remote station comes up and plays as it should. Later in the day when I
> shut it down during the day it will not come back up and all I get is a
> bunch of beeps.
>
> This happens each morning. On Friday the 22nd I turned it on at 5 AM and 5
> off at 5 PM.
> When I tried to recycle the K3/0 to turn on the remote it would not
> initialize and would just beep at me.
>
> This is all be done in my shack at home but via the internet thru a router.
> The router can see both of the RRC-1258 boxes and IP addresses which are
> good with the software, Microbit Software manager.
>
>
> I’m at a loss and can’t figure out what is causing it not to work when it
> works well in the morning. I can shut it down and back up in the morning but
> after an hour and more it will not start up again. Just beeps. Could it a
> cable?
>
> I had Friend stop over with his K3/0 mini head and that did not work either.
> I changed the K3 remote radio with another K3 radio and that did not solve
> the problem.
>
> Any Ideas would be a big help.
>
> 73, Wayne N2WK
>