[Elecraft] Back to VFO linking.

[Wayne Burdick]

VFO A controls both receivers in diversity mode, but VFO B can be tuned separately. Typically it would be used as a holding register for another frequency of interest, or for the transmit frequency in SPLIT mode.

See the third paragraph on page 40 (under “Diversity Receive”).

73,
Wayne
N6KR




> On Sep 21, 2017, at 6:17 PM, Zbigniew Tyrlik <jowoc1 at gmail.com> wrote:
> 
> Freshly updated K3 by factory. 
> 
> 
> Yes, I know the VFO lnk is now a menu item… 
> 
> 
> but: 
> 
> 1) use menu to turn VFO linking on. 
> works as expected.  Turning VFO A properly changes VFO B. 
> 2) turn SUB ON.   
> works as expected,  can adjust VFO B separately, and then VFO A will move both properly. 
> 
> 3) Turn Diversity on ( Long press on on SUB ). 
> VFO A and VFO B are no longer linked. Even after turning Diversity OFF, they are unlinked; checking COFNIG shows VFO LNK is OFF in config. 
> the only way after using Diversity ON is to go into CONFIG meny to turn VFO LNK ON. 
> 
> What am I missing ?
> 
> 73, de KU1T 
> _zjt
> -- 
> ********************************************************************
> Zbigniew J. Tyrlik DoD# 0759       R1200GS   IBA 31595
> Free thinker, traveler, poet, happy father and husband....
> point'n'click view of the world  	http://www.kleks.org/fotos/
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com