[Elecraft] Specs KIO3-B internal sound card
Clay Autery
KY5G at montac.com
Tue Sep 19 22:31:31 EDT 2017
Don't you think being "rather disappoint[ed]" in the internal sound card
is a bit demanding? Do you really expect a 192 kHz, studio grade DAC
internal to the radio?
I understand the desire for low noise and wide bandwidth... I do. But
to put a Focusrite Scarlett grade sound interface internal to the radio
is simply over the top. Shoot, why not simply ask for a full 12 channel
outboard mixer/DAC be miniaturized and stuff in next to the 100 W amp,
sub reciver, etc, etc, ad nauseum.
Not trying to be a jerk... just trying to adjust your perspective a
bit. Hope your DXpedition goes swimmingly. If you don't need a lot of
additional external channels, you might try one of the ASUS or other
external sound cards devices folks use with/for the LP-PAN II and other
devices... Many of them are 192kHz, pretty low noise and a decently
flat frequency response.
73,
______________________
Clay Autery, KY5G
(318) 518-1389
On 9/19/2017 5:55 PM, Udo Langenohl - DK5YA wrote:
> Thanks Christopher,
>
> compared to high quality external devices SNR and THD+N is rather
> poor. And so is the dynamic range and the max. sampling rate of just
> 48KHz.
> Rather disappointing, to be honest.
>
> 73 Udo, DK5YA
>
> Am 20.09.2017 um 00:24 schrieb Christopher Hoover:
>> The circuit is based on PCM2901 <<http://www.ti.com/product/PCM2901>>
>>
>>
>>
>>
>> On Tue, Sep 19, 2017 at 2:05 PM, Udo Langenohl - DK5YA
>> <dk5ya at dk5ya.de <mailto:dk5ya at dk5ya.de>> wrote:
>>
>> Gentleman,
>>
>> I'm looking for specs of the internal sound device which is part of
>> the KIO3B board but couldn't find any on the Elecraft web site.
>> Anybody out there who's got detailed information?
>>
>> I.e.:
>> Sample Rates
>> Frequency Response
>> Dynamic Range
>> THD+N
>> Noise EIN
>> THD+N Outputs
>>
>> I'm just preparing all the stuff we gonna take with us for our
>> 144/432 EME DXPedition to DU (DX7EME) in November and I would like
>> to reduce parts we have to carry as much as I can. We have two K3
>> with us, usually connected to very high quality external sound
>> devices (Focusrite Scarlett, Delta 44). Since we are doing
>> moonbounce (JT65b) and each and every dB counts we are focussing on
>> lowest noise possible in our sound devices. If the internal sound
>> card of the KIO3B will meet our needs we could propably reduce
>> weight and lower all the cable mess a lot.
>>
>> 73 Udo, on behalf of DX7EME team
>>
>> P.S.: Anybody in the group using the internal sound device on EME?
>> P.P.S.: I'be ordered a KIO3B already and will upgrade one of the
>> K3's at the end of the week, delivery permitting.
>>
>> -- ******************************************
>> Webs by DK5YA: *
>> http://www.dx7eme.de/
>> http://www.mmmonvhf.de/ [editor]*
>> http://www.vhfdx.de/ [owner] *
>> http://www.solweb.de/ [owner] *
>> http://www.spessartwetter.de/ [owner] *
>> ******************************************
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> <http://mailman.qth.net/mailman/listinfo/elecraft>
>> Help: http://mailman.qth.net/mmfaq.htm
>> <http://mailman.qth.net/mmfaq.htm>
>> Post: mailto:Elecraft at mailman.qth.net
>> <mailto:Elecraft at mailman.qth.net>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ch at murgatroid.com <mailto:ch at murgatroid.com>
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ky5g at montac.com
More information about the Elecraft
mailing list