[Elecraft] XV144 - Power adjustment

[Don Wilhelm]

Jim,

You have the input attenuator in the XV144 that you can adjust if that 
is a problem for you.
Take the top cover off and you will see the input attenuator pot near 
the center rear quadrant.

73,
Don W3FPR

On 9/19/2017 6:04 AM, Jim Rogers wrote:
> Boy,  you whisper at this thing and it gets full 20W output. I was 
> having some problems with overshoot on CW so I re-calibrated and the 
> problem has gone away..... 0.20mW = 20W out on a Bird 43. 0.10mW gives 
> about 15W out on the Bird 43. R22 power out is barely cracked, R10 set 
> to indicated power. It works!