[Elecraft] R: K2 menu issue

[Don Wilhelm]

If you are exiting the menu correctly, then the problem is likely with a 
memory location in the EEPROM IC U7 on the control board.
If you replace U7, you will have to do a Master Reset followed by CAL 
PLL and CAL FIL as well as re-entering all the other menu items.
Download the K2 A to B instructions because that contains a chart to 
guide you in recording the menu entries.

73,
Don W3FPR

On 9/17/2017 6:42 AM, IZ0DIO via Elecraft wrote:
> Yes, Don. Consider also that this behavior is only for the ATU menu as all
> the others menu setting are correctly stored.
> 
> Ciao
> 
> Giorgio