[Elecraft] P3: Vertical Lines for display question

[Dave Cole]

Hello Don,
Thank you for the answer.  I am looking to impress a grid structure on 
the P3, as opposed to some lines I need to move.  I want to be able to 
document exactly how wide something is signal wise, by taking a snap of 
the signal, then looking at it with my computer.  I had not thought 
about the markers, thanks for that.  That will do if I can't locate a 
way to actually impress a grid on the output of the P3.

73s and thanks,
Dave
NK7Z
http://www.nk7z.net

On 09/16/2017 09:31 AM, Don Wilhelm wrote:
> Dave,
> 
> There are 2 thin Markers that can be moved about on the spectrum display 
> part of the screen - Marker A and Marker B.  These are different from 
> the VFO A and VFO B display bands.
> I think the vertical lines you are asking for can mask those markers.
> 
> 73,
> Don W3FPR
> 
> On 9/16/2017 10:21 AM, Dave Cole wrote:
>> Hello,
>>
>> I would like to get a grid reference overlaid on the screen of my P3, 
>> and can't locate a setting for this.
>>
>> All I find for controlling this, are two choices, horizontal grid 
>> lines, and no vertical lines, of billions of dots, defining a sort of 
>> grid pattern for both the horizontal and vertical.  I would like a 
>> simple grid to be displayed.
>>
>> Is there an option I am missing which allows the horizontal lines, and 
>> a set of vertical lines, (not dots), perhaps dropping from the markers 
>> at the top and bottom of the display?