[Elecraft] XMIT button not working?

[Mark E. Musick]

Hi Ron.
You load an older firmware version as you would a new version.
Bring up the K3 utility, point it at the firmware version you want and tell
it to send the firmware to the K3.
I have many of the older firmware versions. Prior to 5.50 I have 5.38, 5.29,
5.26.
I can e-mail you which ever one you want.
I do have further back than 5.26 if you find it too has the PTT change. Just
let me know.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of n6ee
Sent: Thursday, September 14, 2017 3:34 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] XMIT button not working?

This change which disables XMIT in FSK D mode, which Wayne described as
intentional, has apparently broken the ability to assert PTT via CAT
commands.  I need this in order to implement a new feature in Writelog which
requires PTT via CAT in the FSK D mode.  

I have proven on ten different Remote Ham Radio stations that the new FSK D
mode feature in Writelog works just fine with older K3 firmware but does not
work on three RHR stations which have had their firmware upgraded to 5.5 or
later.  

How far back do we need to go with restoring the older firmware that worked?

And, how do you restore to older firmware on the K3? Is their an archive
somewhere of old firmware releases and will they load ok with the K3
Utility?

Thanks and 73,
Ron N6EE



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to markmusick at sbcglobal.net