[Elecraft] Subject: Re: Setting the audio level for use in soundcard data modes.

[Edward R Cole]

Just a suggestion (or hint) for setting up DATA-A:

I programmed my K3 (and KX3) memory channels with my favorite 
operating frequencies.  Digital modes have standard sub-band or 
operating frequencies, so I set up my K3 modes (eg CW, SSB), 
including DATA-A selection for my favorite digital "channels".

Example on 6m:  I have 50.100 programmed for CW, 50.125 for USB, 
50.200 for DATA-A (eme) and 50.260 for DATA-A (msk144).  Of course 
the selection of digital modes is done in the sw (e.g. WSJT-X).  I 
have several instances of my WSJT sw set up for different digital 
modes so I only need launch that instance of sw to be up and running 
on a given mode.  Soundcard audio settings still need tweaking but 
the test signal selection in the sw makes that a quick function (I 
use an external soundcard with manual level controls).  My K3 Line In 
is set to 10 which works fine for me.

On 2m-eme I use MAP-65 which a different sw than WSJT, so 144.125 is 
set for DATA-A and I just launch MAP-65.

Hope this suggestion might ease changing of modes for some of you.

73, Ed - KL7UW
   http://www.kl7uw.com
Dubus-NA Business mail:
   dubususa at gmail.com