[Elecraft] Setting the audio level for use in soundcard data modes.

[Nr4c]

Don
Does DATA A also set audio in to Line In?  

This makes switching modes seamless. No changes to make. 

Sent from my iPhone
...nr4c. bill


> On Sep 12, 2017, at 9:15 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Tom,
> 
> Using DATA A is the same as using USB *except* compression is set to zero and TX EQ is set to flat automatically.
> 
> So yes, USB may work OK, but you have a lot more flexibility with other modes when using DATA A.
> 
> That allows you to set whatever you want for SSB and not have to change it when you want to operate digital - which should not use compression nor equalization to minimize distortion in the transmitted signal.
> 
> 73,
> Don W3FPR
> 
>> On 9/12/2017 8:58 PM, Tommy wrote:
>>   Don,
>>     Why DATA A mode and not USB? I've been doing FT8 using USB and it works fine. It seems.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com