[Elecraft] Setting the audio level for use in soundcard data modes.

[Bob McGraw K4TAX]

I agree with Don.  It appears that many seem to make a simple solution much to complex.  Stop and think about the elements or points that control audio levels.  And don't forget, if you use the computer for other sound card applications, it may change levels.  It may be necessary to make notes as to values or settings until you feel comfortable with each application.  

Here to assist. 

Bob, K4TAX


Sent from my iPhone

> On Sep 12, 2017, at 2:59 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Bill,
> 
> My fingers were getting raw from repeating that info last week.  I hope it helps several who are having problems.
> 
> 73,
> Don W3FPR
> 
>> On 9/12/2017 3:12 PM, Nr4c wrote:
>> Thanks, Don.
>> 
>> I have followed these instructions for years and data modes are not difficult.
>> 
>> My biggest issue has been with software and not realizing how many little check boxes and other items in varied locations can affect the pleasure or distaste for digital applications. Such as using RTTY and every time I try to run the software resets my mode to FSK and I'm using a sound card!  Oh yeah, there is a option for that somewhere in the program, just need to find it.
>> 
>> Anyway. Good on you for adding this to your website.
>> 
>> Sent from my iPhone
>> ...nr4c. bill
>> 
>> 
>>> On Sep 12, 2017, at 1:47 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>> 
>>> I have updated my website www.w3fpr.com with a document dealing with using Elecraft transceivers for soundcard data modes.
>>> Scroll down to the bottom of the left column and click on the link to the page.
>>> 
>>> This document has been reviewed by Wayne and Lyle (perhaps others) at Elecraft and approved.
>>> 
>>> As pointed out, Elecraft transceivers behave differently than other amateur transceivers, so the setup procedure is different than the common internet advice.
>>> 
>>> 73,
>>> Don W3FPR
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to nr4c at widomaker.com
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net