[Elecraft] [KAT500] Only ANT1

[Dick Dievendorff]

Could one or more of the ANT connectors be disabled?  

KAT500 Utility, Configuration, Edit Configuration, Antennas.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of MaverickNH
Sent: Monday, September 11, 2017 14:25
To: elecraft at mailman.qth.net
Subject: [Elecraft] [KAT500] Only ANT1

I have a K3S/KPA500/KAT500 setup configured with AUX cables in the Enhanced
configuration. Two antennas are connected to ANT1 and ANT2. The ANT LED is
Green on 1 and when the ANT button is pressed will not select the antenna
connected to ANT2. I can connect each antenna to ANT1 and each works but I
cannot select other than ANT1 with the ANT button.

I'm turning on the KAT500 before K3S as indicated but perhaps am missing
some configuation option?

Bret/N4SRN



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com