[Elecraft] Adjusting Audio Level for Digital Modes

[MaverickNH]

At present, I have my PC's USB Audio Codec Playback Level set at 35%, and am
adjusting ALC with the MIC knob. With the WSTJ-X Tune ON, I'm slowly
increasing MIC until the 3rd bar shows. Further increase jumps directly to
the 5th bar, with no 4th bar appearing or flashing 5th bar.
I could swear I used to be able to get that flickering 5th bar. Must be I
have something else set incorrectly?

But either way, I must have nudged the MIC button as now things seem OK. Any
way to lock that? As such, when pressing the K3S TUNE button ON, the POWER
knob on the K3S adjusts power smoothly up on the K3S (as seen on the P3TXMON
and K3S display) with KPA500 off. With KPA500 ON, increasing K3S power knob
increases KPA500 display power, with the P3TXMON going up too.

I'll have to add "check ALC/MIC setting to my WSJT-X Cheat Sheet. Thanks for
the help guys.

BRET/N4SRN 



--
Sent from: http://elecraft.365791.n2.nabble.com/