[Elecraft] OT - WSJT-X & K3s

[Don Wilhelm]

Gary,

With any soundcard data mode, you should be in DATA A with MIC SEL set 
to LINE IN.  That includes WSJT.
When using the internal soundcard, make certain there is nothing 
connected to the LINE IN jack - it takes precedence over the output of 
the internal soundcard.

As always, set the audio level to show 4 bars solid on the ALC meter 
with the 5th bar flashing (the WSJT instructions are not correct for the 
K3/K3S).  Adjust the power level with the POWER knob.

73,
Don W3FPR

On 9/5/2017 5:21 PM, Gary Smith wrote:
> The topic has recently drifted a bit from
> my original question but the information
> given has been interesting. As I'm using a
> K3s and its internal sound card, I put
> away my Creative USB 0404 card, though it
> was a fine card to use with the K3.
> 
> I have gotten WSJT running though I
> haven't yet scored a QSO, this means I
> probably have something not set quite
> right yet. I do have a question specific
> for the K3s, maybe K3; Do I have the K3s
> set in USB mode or in the data mode when
> using WSJT?
> 
> And thank you to all who replied to my
> initial questions, I truly appreciate it.
> 
> 73,
> 
> Gary
> KA1J
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>