[Elecraft] Bluetooth audio adapter for K3
Gary Harrold
gary at benden.com
Fri Sep 1 18:28:49 EDT 2017
I have been using an inexpensive adaptor from Amazon for several weeks now. Can't say what it is as in a joint effort a friend bought two adaptors after I suggested it might couple to his hearing aids and I later bought inexpensive headphones for both of us. Tag on back says model H-366T. Hangs toward the ceiling in the Ham shack and I can listen in the den if I like. Very nice to be able to move around the shack without being entangled in a cord. Has mic capability as well but haven't looked into that yet.
Gary W. Harrold
Retired, Amateur Radio Active
WA5TED
806 790 0966
-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of elecraft-request at mailman.qth.net
Sent: Friday, September 1, 2017 5:11 PM
To: elecraft at mailman.qth.net
Subject: Elecraft Digest, Vol 161, Issue 1
Send Elecraft mailing list submissions to
elecraft at mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
elecraft-request at mailman.qth.net
You can reach the person managing the list at
elecraft-owner at mailman.qth.net
When replying, please edit your Subject line so it is more specific than "Re: Contents of Elecraft digest..."
Today's Topics:
1. Re: KX2, spy radio (Dave Cole)
2. Submission (Greg)
3. Re: UPS Can Be a Noise Source (Phil Kane)
4. Re: KX2, spy radio (Mike Morrow)
5. Re: KX2, spy radio (Mike Morrow)
6. Re: UPS Can Be a Noise Source (Jim Brown)
7. Re: K1 Discontinued (Petr, OK1RP/M0SIS)
8. Re: UPS Can Be a Noise Source (Richard Lamont)
9. The times they are a changin. (Glen Torr)
10. Re: Thanks for all the portable operation photos so far
(Eric Swartz - WA6HHQ, Elecraft)
11. Re: KX2, spy radio (Dave Sublette)
12. OT: Spy Radio (Ken G Kopp)
13. Re: KX2, spy radio (Charlie T, K3ICH)
14. Re: KX2, spy radio (Jim Sheldon)
15. OT: PC Board Software request (Jim Sheldon)
16. Re: Thanks for all the portable operation photos so far
(jimk8mr at aol.com)
17. Re: UPS Can Be a Noise Source (Phil Kane)
18. Portable Power for digital and Phone operation (Michael Chowning)
19. Re: UPS Can Be a Noise Source (Lynn W. Taylor, WB6UUT)
20. Y-BOX Labor Day Weekend Special - Free Domestic Shipping
(Bob Wilson, N6TV)
21. Re: Portable Power for digital and Phone operation (Mel Farrer)
22. Re: UPS Can Be a Noise Source (Jim Brown)
23. Re: Portable Power for digital and Phone operation (Jim Brown)
24. KX3, IF for XV144 (vhf contesting) (XV144 update?) (Samir Popaja)
25. Re: Portable Power for digital and Phone operation (Mark Goldberg)
26. Update on KXPD2 and KXPD3 paddles (Wayne Burdick)
27. Bluetooth audio adapter for K3 (Yngvi (TF3Y))
28. Re: Portable Power for digital and Phone operation (Jim Brown)
29. Re: Bluetooth audio adapter for K3 (GaryK9GS)
----------------------------------------------------------------------
Message: 1
Date: Thu, 31 Aug 2017 20:20:11 -0700
From: Dave Cole <dave at nk7z.net>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KX2, spy radio
Message-ID: <4681b20a-d084-5c02-c0a9-0fb385b1d155 at nk7z.net>
Content-Type: text/plain; charset=utf-8; format=flowed
That and counting change back...
73s and thanks,
Dave
NK7Z
http://www.nk7z.net
On 08/31/2017 07:56 PM, Charlie T, K3ICH wrote:
> SSB would have been the equivalent of encryption.
>
> Much like cursive writing today is secret code for us "old" people.
>
> Chas
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Stephen
> Peterson
> Sent: Thursday, August 31, 2017 9:34 PM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] KX2, spy radio
>
> Imagine what the WWII resistance/spies would have given for a KX2!
> Fun and interesting to look at the equipment they were using.
> Steve, Ki7L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> pincon at erols.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> dave at nk7z.net
>
------------------------------
Message: 2
Date: Thu, 31 Aug 2017 21:28:45 -0600
From: Greg <greg4810 at att.net>
To: elecraft at mailman.qth.net
Subject: [Elecraft] Submission
Message-ID: <2915F973-A3A4-40C5-A1CF-801F67D19C8C at att.net>
Content-Type: text/plain; charset=us-ascii
Sent from my iPhone
------------------------------
Message: 3
Date: Thu, 31 Aug 2017 21:53:57 -0700
From: Phil Kane <k2asp at kanafi.org>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] UPS Can Be a Noise Source
Message-ID: <7bd5c3f8-5896-b78b-b882-2a6a387808c9 at kanafi.org>
Content-Type: text/plain; charset=utf-8
On 8/31/2017 10:46 AM, Lynn W. Taylor, WB6UUT wrote:
> What I did as part of my ISP was to remove the batteries from my UPSes
> and replace 7 or 12Ah batteries with 100Ah batteries outside the case.
>
> That didn't get me to the 10 hours for maximum battery life, but it
> got me to 8 hours.....
>
> Jim's suggestion also lets you size the battery to run all the gear
> for more than a few minutes.
I have 2 APC UPS devices - I moved one's 7 AH battery to an external container where I have three of them in parallel. That UPS runs the
cable modem, router, and cordless phone system. The other one runs my
desktop computer and accessories. Because of the type of battery in the machine, I would have to do serious soldering to attach external wires, which would void the warranty.
My standby power mentor/guru explained to me quite a few years ago that given a large enough battery source, the limiting factor in most consumer-grade UPS is the heating of the electronics. Both of those UPSes are running at about 15% of "advertised capacity" which, according to APC's runtime curve, extends the run time by a factor of 10.
73 de K2ASP - Phil Kane
Elecraft K2/100 s/n 5402
>From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon
------------------------------
Message: 4
Date: Thu, 31 Aug 2017 23:56:39 -0500 (GMT-05:00)
From: Mike Morrow <kk5f at earthlink.net>
To: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] KX2, spy radio
Message-ID:
<20263843.13890.1504241799987 at elwamui-hound.atl.sa.earthlink.net>
Content-Type: text/plain; charset=UTF-8
Here's a 1970-era small western world 'clandestine' set called the AVCO TAR-224A:
http://www.cryptomuseum.com/spy/tar224/
It's about three times the bulk of the KX3, which is very small for the era and not too large even by today's standards. It puts out 20 watts A1 or A3 from 2 to 24 MHz, and is all solid state with auto antenna tuner and Morse key built onto the front panel. (Sounds familiar.) This 47-year-old set will typically cost today more than a new full-house KX3 if you find one for sale! I have one...it's the provenance that attracts. Technically speaking, only its suitability for use in unfavorable environmental conditions gives it any advantage over a KX3.
Mike / KK5F
-----Original Message-----
>From: Stephen Peterson <scpki7l at gmail.com>
>Sent: Aug 31, 2017 8:33 PM
>
>Imagine what the WWII resistance/spies would have given for a KX2! Fun
>and interesting to look at the equipment they were using.
------------------------------
Message: 5
Date: Fri, 1 Sep 2017 00:09:06 -0500 (GMT-05:00)
From: Mike Morrow <kk5f at earthlink.net>
To: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] KX2, spy radio
Message-ID:
<21321892.13955.1504242546771 at elwamui-hound.atl.sa.earthlink.net>
Content-Type: text/plain; charset=UTF-8
Chas wrote:
> SSB would have been the equivalent of encryption.
Not even remotely so...SSB technology goes back decades before WWII.
>From Wikipedia:
"The first U.S. patent?for SSB modulation was applied for on December 1, 1915 by John Renshaw Carson. The U.S. Navy experimented with SSB over its radio circuits before?World War I. ?SSB first entered commercial service on January 7, 1927 on the?longwave?transatlantic public radiotelephone circuit between New York and London."
Mike / KK5F
------------------------------
Message: 6
Date: Thu, 31 Aug 2017 22:39:15 -0700
From: Jim Brown <jim at audiosystemsgroup.com>
To: Jim McDonald <jim at n7us.net>, elecraft at mailman.qth.net
Subject: Re: [Elecraft] UPS Can Be a Noise Source
Message-ID:
<847c500c-26d2-bd25-cde1-ac3c37d4b2e7 at audiosystemsgroup.com>
Content-Type: text/plain; charset=utf-8; format=flowed
On 8/31/2017 3:26 PM, Jim McDonald wrote:
> I have an APC SmartUPS 700, which I bought many years ago from
> http://www.refurbups.com/. The manual says it's certified as Class B.
Thanks Jim. I looked at a half-dozen APC UPS units advertised on that site about 2 weeks ago, and studied their specs on the APC website. All were Class A. Things change, of course, and I only checked those few units.
73, Jim K9YC
------------------------------
Message: 7
Date: Fri, 1 Sep 2017 00:31:18 -0700 (MST)
From: "Petr, OK1RP/M0SIS" <indians at xsmail.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K1 Discontinued
Message-ID: <1504251078502-0.post at n2.nabble.com>
Content-Type: text/plain; charset=us-ascii
Roney,
congrats for your K1 jewel > nice pics on Flickr.
Yes, I am sure you will be really satisfied with that little rig. If it is properly aligned then it works like champ anywhere you are.
maybe it is time to buy some additional parts until they will be gone...
Good luck!
73 - Petr, OK1RP
-----
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
------------------------------
Message: 8
Date: Fri, 1 Sep 2017 09:05:46 +0100
From: Richard Lamont <richard at lamont.me.uk>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] UPS Can Be a Noise Source
Message-ID: <da7b2252-3d0a-e3e7-1f84-90c1a1c31e76 at lamont.me.uk>
Content-Type: text/plain; charset=utf-8
On 31/08/17 22:56, Jim Brown wrote:
> On 8/31/2017 11:35 AM, Tox wrote:
>> I had a couple racks of APC
>> SmartUPS 2000 units with daisychained batteries to give extended
>> holdup to a couple of racks of telecom and server hw. No clue how RF
>> noisy those units are, though.
>
> All of the APC units for which I've seen spec sheets are FCC Part 15
> Class A (the industrial spec, ILLEGAL to sell for residential use,
> roughly 20 dB worse than Class B).
I had a SmartUPS 750, and it was very bad. Put out crud all the way from VLF to VHF. I threw it away in the end. In the shack I use a much older APC Back-UPS 500 for the computer, which doesn't seem to cause any problems. I've had to replace the battery every 3-4 years, but that's to be expected.
73,
Richard G4DYA
------------------------------
Message: 9
Date: Fri, 1 Sep 2017 20:04:58 +1000
From: Glen Torr <glen.torr at gmail.com>
To: Elecraft Reflector <elecraft at mailman.qth.net>
Subject: [Elecraft] The times they are a changin.
Message-ID:
<CAP3kmB7EAPR2P_wOWEyqzNEMCm39KNf3U=vm5LZ-N5i-=QqVnA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Hi Ho All,
Absolutely no disrespect here, I am an extremely loyal and prolific Elecraft user/builder.
The KX1 and K1 are gone and the KPA 1500 is ascending.
I have ordered a QRP Labs QCX, a very innovative and kit oriented radio.
The mantle at the lower end has moved on.
Cheers,
Glen VK1FB
------------------------------
Message: 10
Date: Fri, 1 Sep 2017 04:26:06 -0700
From: "Eric Swartz - WA6HHQ, Elecraft" <eric at elecraft.com>
To: Wayne Burdick <n6kr at elecraft.com>
Cc: Elecraft Reflector <elecraft at mailman.qth.net>,
"KX3 at yahoogroups.com" <KX3 at yahoogroups.com>
Subject: Re: [Elecraft] Thanks for all the portable operation photos
so far
Message-ID: <3C7DF6AF-7C67-42F7-83A2-F8AA04EC721E at elecraft.com>
Content-Type: text/plain; charset=utf-8
Wayne,
These should be forwarded to Margaret and me for our promo use.
Eric
elecraft.com
_..._
> On Aug 29, 2017, at 2:50 PM, Wayne Burdick <n6kr at elecraft.com> wrote:
>
> I?ve received so many great photos already that I won?t be able to thank everyone personally. But keep ?em coming.
>
> Clearly some folks had a lot more fun than I did this summer.
>
> 73,
> Wayne
> N6KR
>
>
>
>> On Aug 29, 2017, at 9:22 AM, Wayne Burdick <n6kr at elecraft.com> wrote:
>>
>> Hi all,
>>
>> We?re looking for photos of you, your Elecraft portable gear, and great outdoor locations to use in an upcoming newsletter article. We might also use them on our website or in promotional literature.
>>
>> If you have photos you?d like to share, please send them to me directly. I can?t guarantee they?ll be used now; possibly later.
>>
>> Please include one sentence that could be used as a caption. Extra points for humor or lessons learned.
>>
>> 73,
>> Wayne
>> N6KR
>>
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> eric.swartz at elecraft.com
------------------------------
Message: 11
Date: Fri, 1 Sep 2017 08:45:31 -0400
From: Dave Sublette <k4to at arrl.net>
To: Elecraft Reflector <Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KX2, spy radio
Message-ID: <DA38B316-7F5C-42E4-8BA3-8684A52A324E at arrl.net>
Content-Type: text/plain; charset=utf-8
As a former CT ? I enjoyed the web page. Thanks for sharing.
Dave, K4TO
> On Sep 1, 2017, at 1:09 AM, Mike Morrow <kk5f at earthlink.net> wrote:
>
> Chas wrote:
>
>> SSB would have been the equivalent of encryption.
>
> Not even remotely so...SSB technology goes back decades before WWII.
>
> From Wikipedia:
>
> "The first U.S. patent for SSB modulation was applied for on December 1, 1915 by John Renshaw Carson. The U.S. Navy experimented with SSB over its radio circuits before World War I. SSB first entered commercial service on January 7, 1927 on the longwave transatlantic public radiotelephone circuit between New York and London."
>
> Mike / KK5F
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> k4to at arrl.net
------------------------------
Message: 12
Date: Fri, 1 Sep 2017 06:57:40 -0600
From: Ken G Kopp <kengkopp at gmail.com>
To: Elecraft <elecraft at mailman.qth.net>
Subject: [Elecraft] OT: Spy Radio
Message-ID:
<CAD4CdTNRYEqGD0K6LD3mkXMj1o4pOaqktYcH4TjMVU2dVgq55g at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Google "RS-6". I had a set many years ago. Got them via Navy MARS as N0SJP.
73!
K0PP
------------------------------
Message: 13
Date: Fri, 1 Sep 2017 09:09:55 -0400
From: "Charlie T, K3ICH" <pincon at erols.com>
To: <Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KX2, spy radio
Message-ID: <[email protected]>
Content-Type: text/plain; charset="UTF-8"
And here I thought Art Collins invented SSB, like algore invented the internet (wink-wink)
Chas
(For all who take life too seriously this WAS intended to be humorous)
-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave Sublette
Sent: Friday, September 01, 2017 8:46 AM
To: Elecraft Reflector <Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KX2, spy radio
As a former CT ? I enjoyed the web page. Thanks for sharing.
Dave, K4TO
> On Sep 1, 2017, at 1:09 AM, Mike Morrow <kk5f at earthlink.net> wrote:
>
> Chas wrote:
>
>> SSB would have been the equivalent of encryption.
>
> Not even remotely so...SSB technology goes back decades before WWII.
>
> From Wikipedia:
>
> "The first U.S. patent for SSB modulation was applied for on December 1, 1915 by John Renshaw Carson. The U.S. Navy experimented with SSB over its radio circuits before World War I. SSB first entered commercial service on January 7, 1927 on the longwave transatlantic public radiotelephone circuit between New York and London."
>
> Mike / KK5F
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> k4to at arrl.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to pincon at erols.com
------------------------------
Message: 14
Date: Fri, 01 Sep 2017 14:01:27 +0000
From: "Jim Sheldon" <w0eb at cox.net>
To: "Elecraft Mailing List" <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KX2, spy radio
Message-ID: <em579cbec1-9311-4f9b-8f77-ef1814123ccb at jimsdesktop-pc>
Content-Type: text/plain; format=flowed; charset=utf-8
Naw, he just figured out a practical way to use it in smaller radios by the invention of the narrow bandwidth, very steep skirted "mechanical"
filter to lop off the unwanted sideband (if you consider the radios of that day smaller - LOL). The real use of SSB came when General LeMay of SAC adopted it for their world wide HF communications network and propagation conditions during that time were so good that it was almost impossible NOT to communicate anywhere you wanted to with SSB.
W0EB
------ Original Message ------
From: "Charlie T, K3ICH" <pincon at erols.com>
To: Elecraft at mailman.qth.net
Sent: 9/1/2017 8:09:55 AM
Subject: Re: [Elecraft] KX2, spy radio
>And here I thought Art Collins invented SSB, like algore invented the
>internet (wink-wink)
>
>Chas
>
>
>(For all who take life too seriously this WAS intended to be humorous)
>
>-----Original Message-----
>From: elecraft-bounces at mailman.qth.net
>[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave Sublette
>Sent: Friday, September 01, 2017 8:46 AM
>To: Elecraft Reflector <Elecraft at mailman.qth.net>
>Subject: Re: [Elecraft] KX2, spy radio
>
>As a former CT ? I enjoyed the web page. Thanks for sharing.
>
>Dave, K4TO
>>On Sep 1, 2017, at 1:09 AM, Mike Morrow <kk5f at earthlink.net> wrote:
>>
>>Chas wrote:
>>
>>>SSB would have been the equivalent of encryption.
>>
>>Not even remotely so...SSB technology goes back decades before WWII.
>>
>>From Wikipedia:
>>
>>"The first U.S. patent for SSB modulation was applied for on December
>>1, 1915 by John Renshaw Carson. The U.S. Navy experimented with SSB
>>over its radio circuits before World War I. SSB first entered
>>commercial service on January 7, 1927 on the longwave transatlantic
>>public radiotelephone circuit between New York and London."
>>
>>Mike / KK5F
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Elecraft at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net Please help support this email
>>list: http://www.qsl.net/donate.html Message delivered to
>>k4to at arrl.net
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to pincon at erols.com
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to w0eb at cox.net
------------------------------
Message: 15
Date: Fri, 01 Sep 2017 15:28:39 +0000
From: "Jim Sheldon" <w0eb at cox.net>
To: "Elecraft Mailing List" <elecraft at mailman.qth.net>
Subject: [Elecraft] OT: PC Board Software request
Message-ID: <eme3be3e80-c029-492f-bc9c-6284a816247e at jimsdesktop-pc>
Content-Type: text/plain; format=flowed; charset=utf-8
Anyone out there have an old copy of the "Copper Connection" PCB
software that no longer use and are willling to part with? Since
Express PCB bought them out I can't find the software anymore. I need
something that will produce the "Gerber" files that pretty much all the
PCB manufacturers need to do production PCB's even in limited
quantities.
Please reply off list to keep the clutter (and Eric's wrath) to a
minimum - LOL.
Jim - W0EB
------------------------------
Message: 16
Date: Fri, 1 Sep 2017 12:12:11 -0400
From: jimk8mr at aol.com
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Thanks for all the portable operation photos
so far
Message-ID: <15e3e36ca5e-c08-317dc at webjas-vae062.srv.aolmail.net>
Content-Type: text/plain; charset=utf-8
For a couple of photos of the joys of playing with Elecraft radios, check out my operation in the 2017 ARRL DX CW contest. The photos don't include my K3, and would not likely be considered suitable for publication, but anyway:
http://floridacontestgroup.org/contest-gazette/
And check out page 10 of the March 2017 issue.
Contesting is good when you head to the salt water!
BTW, I have since discovered that the Prius, when parked with the car "ON", will keep the 12 volt battery pretty well charged from the hybrid battery, with little or no RFI.
73 - Jim K8MR
-----Original Message-----
From: Eric Swartz - WA6HHQ, Elecraft <eric at elecraft.com>
To: Wayne Burdick <n6kr at elecraft.com>
Cc: Elecraft Reflector <elecraft at mailman.qth.net>; KX3 <KX3 at yahoogroups.com>
Sent: Fri, Sep 1, 2017 7:28 am
Subject: Re: [Elecraft] Thanks for all the portable operation photos so far
Wayne,These should be forwarded to Margaret and me for our promo use.Ericelecraft.com_..._> On Aug 29, 2017, at 2:50 PM, Wayne Burdick <n6kr at elecraft.com> wrote:> > I?ve received so many great photos already that I won?t be able to thank everyone personally. But keep ?em coming.> > Clearly some folks had a lot more fun than I did this summer. > > 73,> Wayne> N6KR>
------------------------------
Message: 17
Date: Fri, 1 Sep 2017 10:32:02 -0700
From: Phil Kane <k2asp at kanafi.org>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] UPS Can Be a Noise Source
Message-ID: <6a3afd08-1500-0e47-b0dc-e8562d9c54a2 at kanafi.org>
Content-Type: text/plain; charset=utf-8
On 8/31/2017 2:56 PM, Jim Brown wrote:
> All of the APC units for which I've seen spec sheets are FCC Part 15> Class A (the industrial spec, ILLEGAL to sell for residential use,>
roughly 20 dB worse than Class B).
The spec sheets for both of my APC UPS devices (BE550R and BX1500G)
specify FCC Part 15 Class B.
> Second, a local computer guru, AE6KS, has observed that most UPS mfrs charge batteries at too fast a rate for good battery life.
Both spec sheets show a recharge time of 16 hours. Is that "too fast"?
73 de K2ASP - Phil Kane
Elecraft K2/100 s/n 5402
>From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon
------------------------------
Message: 18
Date: Fri, 1 Sep 2017 13:37:44 -0400
From: Michael Chowning <mike.chowning at mgccc.org>
To: Elecraft Reflector <Elecraft at mailman.qth.net>
Subject: [Elecraft] Portable Power for digital and Phone operation
Message-ID: <A2DB58F7-BE0D-490C-978C-D88FFD5EAC59 at mgccc.org>
Content-Type: text/plain; charset=utf-8
Being there is no better place to get advice than this reflector, I am seeking your recommendation. I have an Elecraft K3, P3, KAT500 & KPA500.
I want to operate somewhat portable with the K3, P3, monitor and laptop, buddipole on SSB and digital modes on Field day, and demonstrations on outings to community events (like festivals, etc). My options, I?m considering are:
1) Honda 2000i gasoline generator
2) Yamaha EF2000iSV2 (with propane option)
+++++++++++++++++++++++++++++++++++
1) Deep Cell 12v 100amp battery (brand, model, control charger?)
2) Lipo battery (brand, model, control charger?)
2) appropriate solar power panels and controller charge for either of the above battery (brand, model, adapters?)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
My questions:
1) Is it best to go with the generator option; and if so, which of the two choices above? Any outstanding reason for this option, and choice of the two?
2) Is it best to go with the Battery, and solar option; why? Is there reason to choose the Lipo over the Deep Cell batteries? I am concerned over the choices about battery voltages and amp?s needed to operate as stated above.
It?s noisy but the generator option seems on the surface much simpler for setup. However, from the perspective of demonstration of Amateur Radio today, the solar and battery option appears to be more demonstrative of the state of Amateur Radio today. Being 77 yrs old, I don?t want to get over my head in technology (though I love such).
Thanks for your thoughtful recommendations.
Mike, N8TTR
------------------------------
Message: 19
Date: Fri, 1 Sep 2017 10:47:53 -0700
From: "Lynn W. Taylor, WB6UUT" <KX3.1 at ColdRocksHotBrooms.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] UPS Can Be a Noise Source
Message-ID:
<2a0cef39-96df-bee2-7776-b2995cddc9f3 at ColdRocksHotBrooms.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Keep in mind that by code, a device plugged into a 15 amp circuit must
not draw more than 12 amps continuous.
When you get into the larger UPSes, they might want to charge really
fast, but charging at a high rate and carrying the rated load will
exceed 12 amps.
So depending on the rating of the unit, and the recommended input
circuit, some models will definitely charge slow.
16 hours is not too fast for charging. If the UPS can't carry the load
for ten hours, then the discharge rate is WAY TOO FAST.
Most UPSes are designed to carry the load for about 15 minutes, so if
you aren't killing the battery charging, you're killing it discharging.
73 -- Lynn
On 9/1/2017 10:32 AM, Phil Kane wrote:
>> Second, a local computer guru, AE6KS, has observed that most UPS mfrs charge batteries at too fast a rate for good battery life.
> Both spec sheets show a recharge time of 16 hours. Is that "too fast"?
------------------------------
Message: 20
Date: Fri, 1 Sep 2017 11:16:46 -0700
From: "Bob Wilson, N6TV" <n6tv at arrl.net>
To: Elecraft Reflector <Elecraft at mailman.qth.net>, Elecraft K3 Yahoo
Group <elecraft_k3 at yahoogroups.com>
Subject: [Elecraft] Y-BOX Labor Day Weekend Special - Free Domestic
Shipping
Message-ID:
<CAOmNKG+1U=D5M6dQ4m1_XhG0o1jbwthATyrVEpdCPfv3Ud8zgA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
All Y-BOX orders received before midnight Pacific Time on Labor Day (by
2017-09-05 07:00 UTC) will qualify for *free domestic shipping via USPS
Priority Mail*. Limit: 3 Y-BOXs per customer.
International orders received by the same deadline will qualify for
discounted shipping (discounted by same dollar amount as domestic shipping).
The Y-BOX is a 4-way passive splitter and breakout box for the Elecraft K3
and K3S accessory port. The main value is the elimination of a tangle of
unreliable Y-Cable connections when you have multiple devices that all need
to connect to the same ACC/AUX connector, including:
1. KAT500 / KPA500 / KPA1500 cable (KPAK3AUX).
2. Band Decoder
3. FSK keying interface
4. SO2R box
5. Remote Rig Interface
The Y-BOX can also be used as a breakout box for any device that uses a
15-pin "VGA" style accessory connector (DE-15), including the Flex 6000
series, ACOM Amplifiers, and the 4O3A Antenna Genius.
For photos, details, and the order link, please visit my web site. Order
any time before midnight PT Monday to receive free domestic shipping:
https://bit.ly/Y-BOX
Thanks, and Happy Labor Day!
73,
Bob, N6TV
------------------------------
Message: 21
Date: Fri, 1 Sep 2017 18:19:08 +0000 (UTC)
From: Mel Farrer <farrerfolks at yahoo.com>
To: Michael Chowning <mike.chowning at mgccc.org>, Elecraft Reflector
<Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Portable Power for digital and Phone operation
Message-ID: <934675409.1341210.1504289948897 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8
While I don't this much anymore, I would consider the generator for situations where solar is not an option.
Honda 2000i ~$1100
Jinko Solar 280W Eagle - Monocrystalline PERC Solar Module - 60 Cell - Silver Frame
|
|
|
| | |
|
|
|
| |
Jinko Solar 280W Eagle - Monocrystalline PERC Solar Module - 60 Cell - Silv...
High-Efficient Mono Crystalline Module Intergrated with Passivated Emmiter Rear Contact (PERC) technology, 4-bus... | |
|
|
$158.67 ?2X or 560 watts for <$350
Solar is more pubic friendly albeit more ground space.Will handle your power load during the day and quite a while on the battery alone.
Mel, K6KBE
From: Michael Chowning <mike.chowning at mgccc.org>
To: Elecraft Reflector <Elecraft at mailman.qth.net>
Sent: Friday, September 1, 2017 10:54 AM
Subject: [Elecraft] Portable Power for digital and Phone operation
Being there is no better place to get advice than this reflector, I am seeking your recommendation.? I have an Elecraft K3, P3, KAT500 & KPA500.
I want to operate somewhat portable with the K3, P3, monitor and laptop, buddipole on SSB and digital modes on Field day, and demonstrations on outings to community events (like festivals, etc).? My options, I?m considering are:
1) Honda 2000i gasoline generator
2) Yamaha EF2000iSV2 (with propane option)
+++++++++++++++++++++++++++++++++++
1) Deep Cell 12v 100amp battery (brand, model, control charger?)
2) Lipo battery (brand, model, control charger?)
2) appropriate solar power panels and controller charge for either of the above battery (brand, model, adapters?)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
My questions:
1) Is it best to go with the generator option; and if so, which of the two choices above?? Any outstanding reason for this option, and choice of the two?
2) Is it best to go with the Battery, and solar option; why? Is there reason to choose the Lipo over the Deep Cell batteries? I am concerned over the choices about battery voltages and amp?s needed to operate as stated above.
It?s noisy but the generator option seems on the surface much simpler for setup.? However, from the perspective of demonstration of Amateur Radio today, the solar and battery option appears to be more demonstrative of the state of Amateur Radio today.? Being 77 yrs old, I don?t want to get over my head in technology (though I love such).
Thanks for your thoughtful recommendations.
? ? ? Mike, N8TTR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to farrerfolks at yahoo.com
------------------------------
Message: 22
Date: Fri, 1 Sep 2017 11:31:57 -0700
From: Jim Brown <jim at audiosystemsgroup.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] UPS Can Be a Noise Source
Message-ID:
<55c9cb0b-eff5-5856-b41a-45005ca14fe2 at audiosystemsgroup.com>
Content-Type: text/plain; charset=utf-8; format=flowed
No, that's just about ideal for battery life.
73, Jim
On 9/1/2017 10:32 AM, Phil Kane wrote:
>> Second, a local computer guru, AE6KS, has observed that most UPS mfrs charge batteries at too fast a rate for good battery life.
> Both spec sheets show a recharge time of 16 hours. Is that "too fast"?
------------------------------
Message: 23
Date: Fri, 1 Sep 2017 11:41:21 -0700
From: Jim Brown <jim at audiosystemsgroup.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Portable Power for digital and Phone operation
Message-ID:
<4bda1a61-9185-f54b-a2c6-9fcbdad75101 at audiosystemsgroup.com>
Content-Type: text/plain; charset=utf-8; format=flowed
There's no way you're going to run a KPA500 on battery.? IMO, power amps
are totally out of place on FD, which I've always seen as a "barefoot"
or QRP event.
We do county expeditions for QSO parties like 7QP and CQP, and run two
or three stations, each consisting of a K3, KPA500, KAT500, and P3/SVGA.
Each station is powered by a Honda 2000i running in Econmode. They make
some RF noise, which must be filtered with a good multi-turn ferrite
choke. Follow the guidelines for chokes on RG8-size cable
(k9yc.com/RFI-Ham.pdf), and place the choke right at the generator.
Commercial line filters do NOT work.
My neighbor W6GJB converted his 2000i to propane, and loves it. Mine is
still burning petrol.
73, Jim K9YC
On 9/1/2017 10:37 AM, Michael Chowning wrote:
> Being there is no better place to get advice than this reflector, I am seeking your recommendation. I have an Elecraft K3, P3, KAT500 & KPA500.
>
> I want to operate somewhat portable with the K3, P3, monitor and laptop, buddipole on SSB and digital modes on Field day, and demonstrations on outings to community events (like festivals, etc). My options, I?m considering are:
>
> 1) Honda 2000i gasoline generator
> 2) Yamaha EF2000iSV2 (with propane option)
> +++++++++++++++++++++++++++++++++++
>
> 1) Deep Cell 12v 100amp battery (brand, model, control charger?)
> 2) Lipo battery (brand, model, control charger?)
> 2) appropriate solar power panels and controller charge for either of the above battery (brand, model, adapters?)
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> My questions:
> 1) Is it best to go with the generator option; and if so, which of the two choices above? Any outstanding reason for this option, and choice of the two?
> 2) Is it best to go with the Battery, and solar option; why? Is there reason to choose the Lipo over the Deep Cell batteries? I am concerned over the choices about battery voltages and amp?s needed to operate as stated above.
>
> It?s noisy but the generator option seems on the surface much simpler for setup. However, from the perspective of demonstration of Amateur Radio today, the solar and battery option appears to be more demonstrative of the state of Amateur Radio today. Being 77 yrs old, I don?t want to get over my head in technology (though I love such).
> Thanks for your thoughtful recommendations.
> Mike, N8TTR
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim at audiosystemsgroup.com
------------------------------
Message: 24
Date: Fri, 1 Sep 2017 21:11:05 +0200
From: "Samir Popaja" <7s7v at comhem.se>
To: <elecraft at mailman.qth.net>
Subject: [Elecraft] KX3, IF for XV144 (vhf contesting) (XV144 update?)
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"
Hello,
I'm wondering how good the KX3 is for IF with XV144 in VHF contesting.
I have use K3 previously and now )Iwould like to have something little
smaller but with same good performance.
Little worried after I read this review:
http://ve3vn.blogspot.se/2015/02/kx3-review-by-qrp-dxer-and-contester.html
Is any chance for Elecraft to make (KIT UPDATE) for XV144 to use IF on
14MHz, the most transceivers has much better characteristic on 14MHz then on
28MHz. One can choose if they want to make XV144 with 28 or 14MHz IF,
depending on use (CW, SSB, FM).
73' Samir, sm7vzx
------------------------------
Message: 25
Date: Fri, 1 Sep 2017 13:13:07 -0700
From: Mark Goldberg <marklgoldberg at gmail.com>
To: Michael Chowning <mike.chowning at mgccc.org>
Cc: Elecraft Reflector <Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Portable Power for digital and Phone operation
Message-ID:
<CAKn+a3t=qvqA36nHc6EY6D1f3=txBOLXxJY_q_t=ahqjrEsE7w at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
On Fri, Sep 1, 2017 at 10:37 AM, Michael Chowning <mike.chowning at mgccc.org>
wrote:
> Being there is no better place to get advice than this reflector, I am
> seeking your recommendation. I have an Elecraft K3, P3, KAT500 & KPA500.
>
> I want to operate somewhat portable with the K3, P3, monitor and laptop,
> buddipole on SSB and digital modes on Field day, and demonstrations on
> outings to community events (like festivals, etc). My options, I?m
> considering are:
>
> 1) Honda 2000i gasoline generator
> 2) Yamaha EF2000iSV2 (with propane option)
> +++++++++++++++++++++++++++++++++++
>
I don't use generators for field day as we are in the woods and don't want
any noise. The inverter generators are quiet though. I have been threatened
that my RV generator will suffer from "Lead Poisoning" if it is run in the
woods. It is very loud.
> 1) Deep Cell 12v 100amp battery (brand, model, control charger?)
> 2) Lipo battery (brand, model, control charger?)
> 2) appropriate solar power panels and controller charge for either of the
> above battery (brand, model, adapters?)
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++
>
I use a solar system with deep cycle lead acid batteries, recently
installed in my RV, but it was standalone. A description with specific
models may be found on:
https://sites.google.com/site/marksrvmods/
The RV has a large inverter for 115V. I previously used a large inverter
standalone. Both are Xantrex, a good brand. They make some RF hash, but
they are tamable with Ferrite cores. Some inverters are very noisy.
200W of solar panels and two 75 Amp Hour batteries will run a 100W ham
station for field day late into the night. I have 4 batteries and 400W of
solar panels to run the RV too. I am really keen on the flexible solar
panels I use. They are very light and efficient. They have gotten lots of
attention whenever I set them out. They may not be the best for a permanent
installation, but for quick setup and teardown they are ideal.
Note that MPPT solar charge controllers are the most efficient but usually
make lots of RF hash. I use a Morningstar PWM controller that has a bang
bang option, that will either be on or off, no RF hash from switching. It
does reduce the actual output of the 400W panels to 300W though.
Lipo batteries do not produce the right voltage for radios. 4 Cells is too
much, 3 cells is too little. LiFePO4 batteries do and they are safer. A 4
cell pack runs from about 14.4 V down to 12 V at 90% discharge, which is
ideal for remote operation. They still take special charging, sometimes
built in to the batteries, but they are very expensive.
I have a 20 Amp Hour from batteryspace,com that I use for long QRP, and I
have a separate special charger. They also have ones with built in charging
/ balancing circuits, but they cost more.
I have two small 4s1p LiFePO4 packs from buddyrc.com for remote QRP, but
they don't seem to sell them any more.
bioennopower.com has lots of options with built in charging circuits that
make it a little easier and they get good reviews. I could not afford to
have the big boys be LiFePO4 though and have not bought from them. A few
hundred Amp Hours of LiFePO4 will be in the thousands of dollars.
For all these batteries, it is a good idea to monitor them and stop using
them when they get down to about 12V. LifePO4 especially can be permanently
damaged if discharged too low.
Good luck in whatever you choose. As you can see, there are many options
with no "best" option for all circumstances.
73,
Mark
W7MLG
------------------------------
Message: 26
Date: Fri, 1 Sep 2017 13:31:00 -0700
From: Wayne Burdick <n6kr at elecraft.com>
To: Elecraft Reflector <elecraft at mailman.qth.net>
Cc: "KX3 at yahoogroups.com" <KX3 at yahoogroups.com>
Subject: [Elecraft] Update on KXPD2 and KXPD3 paddles
Message-ID: <53E6D35C-05DC-4292-A3CE-20698842B640 at elecraft.com>
Content-Type: text/plain; charset=utf-8
I have to apologize for stating that there were mod kits available for the KXPD2 and KXPD3 that reflect improvements we?ve made over time. Turns out that we only upgrade existing units at the factory, so we can do complete testing before returning them.
For paddles under warranty that aren?t up to the current configuration, we?ll add the upgrades on request, at no charge.
For those out of warranty, we charge a flat $79 fee (plus shipping) to do the upgrade. (We just reduced this from $95.)
If you have an older KXPD3 you?d like to upgrade, please use the following link to place the order:
http://www.elecraft.com/order_form_parts.htm#kx3
For older KXPD2s there will be a similar process, but it is not in place yet. We?ll announce it in a week or two.
73,
Wayne
N6KR
------------------------------
Message: 27
Date: Fri, 01 Sep 2017 20:41:38 +0000
From: "Yngvi (TF3Y)" <tf3y at tf3y.net>
To: "Elecraft at mailman.qth.net" <Elecraft at mailman.qth.net>
Subject: [Elecraft] Bluetooth audio adapter for K3
Message-ID:
<CADXHQtx3rUQAWsG1obfqvnwq6VsM7i0YD9OMJ3xBk8sMBdV7pg at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Has anyone used a Bluetooth adapter for wireless headphones / headset with
the K3?
Any recommendations or suggestions?
What you stay away from?
73, Yngvi TF3Y
--
http://www.tf3y.net
------------------------------
Message: 28
Date: Fri, 1 Sep 2017 14:17:04 -0700
From: Jim Brown <jim at audiosystemsgroup.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Portable Power for digital and Phone operation
Message-ID:
<90bcb35f-a5b8-06f8-a772-18ed26cafff8 at audiosystemsgroup.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Mike,
In addition to the response I wrote earlier and others you have
received, you should study the list archives. There have been many
thoughtful and detailed posts on this topic in the last six months. I've
made several myself.
73, Jim K9YC
On 9/1/2017 10:37 AM, Michael Chowning wrote:
> My questions:
> 1) Is it best to go with the generator option; and if so, which of the two choices above? Any outstanding reason for this option, and choice of the two?
> 2) Is it best to go with the Battery, and solar option; why? Is there reason to choose the Lipo over the Deep Cell batteries? I am concerned over the choices about battery voltages and amp?s needed to operate as stated above.
------------------------------
Message: 29
Date: Fri, 01 Sep 2017 17:10:34 -0500
From: GaryK9GS <garyk9gs at wi.rr.com>
To: "Yngvi (TF3Y)" <tf3y at tf3y.net>, "Elecraft at mailman.qth.net"
<Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Bluetooth audio adapter for K3
Message-ID: <80.87.25924.CDAD9A95 at dnvrco-omsmta02>
Content-Type: text/plain; charset=utf-8
I would like this info too.
73,
Gary K9GS
-------- Original message --------From: "Yngvi (TF3Y)" <tf3y at tf3y.net> Date: 9/1/17 3:41 PM (GMT-06:00) To: Elecraft at mailman.qth.net Subject: [Elecraft] Bluetooth audio adapter for K3
Has anyone used a Bluetooth adapter for wireless headphones / headset with
the K3?
Any recommendations or suggestions?
What you stay away from?
73, Yngvi TF3Y
--
http://www.tf3y.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to garyk9gs at wi.rr.com
------------------------------
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must be a subscriber to post.
Elecraft web page: http://www.elecraft.com
End of Elecraft Digest, Vol 161, Issue 1
****************************************
More information about the Elecraft
mailing list