[Elecraft] (KPA-500) running on 110v

[Phil Kane]

On 10/29/2017 8:43 PM, Don Wilhelm wrote:

> Since I had the advantage to wire my own house, I used #12 for all
> receptacles, and in the hamshack area, I have a dedicated circuit for
> the two receptacles there.  Most installations cannot boast of that same
> advantage.

My first house - 1968 - was one that was newly built.  I had the
opportunity to run a 50A 240V feeder from a breaker on the main panel to
a sub-panel in what was my ham shack after I did the load calculation to
ensure that the main had the capacity to serve the sub-panel as per
code.  Installed dedicated 120V and 240V branches with quality
receptacles.  We stayed there 9 years until we needed a larger place,
but I never was able to do that again.
----

73 de K2ASP - Phil Kane
Elecraft K2/100   s/n 5402

>From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon