[Elecraft] (KPA-500) running on 110v

[Nr4c]

I will add that my receptacle is 5 ft from the panel. And the only other things on this circuit are the light in the Keurig, microwave clock and LCD on the HP laser. 

Sent from my iPhone
...nr4c. bill


> On Oct 30, 2017, at 12:01 PM, Nr4c <nr4c at widomaker.com> wrote:
> 
> Mine works very well on 110 volts. I use a 15A circuit and it powers the Elecraft 30 Watt PS and the amp. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Oct 29, 2017, at 10:23 PM, Robert G Strickland <rcrgs at verizon.net> wrote:
>> 
>> What's the conventional wisdom on running the KPA500 on 110v? At my previous QTH I had 220v, so never had to face this issue. In my new QTH there's no 220v -yet. The operating environment is 100% cw with occasional contests. Thanks for all opinions in advance.
>> 
>> ...robert
>> -- 
>> Robert G Strickland, PhD ABPH - KE2WY
>> rcrgs at verizon.net.usa
>> Syracuse, New York, USA
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com