[Elecraft] (KPA-500) running on 110v

[David Bunte]

Robert -

I have run my KPA500 at rated power for several years from nominal 120 volt
mains. I operate mostly CW with some RTTY as well. I have had many long CW
rag chews, but not much contest operation. My guess is that you should have
no problem.

Dave - K9FN

On Sun, Oct 29, 2017 at 10:24 PM Robert G Strickland <rcrgs at verizon.net>
wrote:

> What's the conventional wisdom on running the KPA500 on 110v? At my
> previous QTH I had 220v, so never had to face this issue. In my new QTH
> there's no 220v -yet. The operating environment is 100% cw with
> occasional contests. Thanks for all opinions in advance.
>
> ...robert
> --
> Robert G Strickland, PhD ABPH - KE2WY
> rcrgs at verizon.net.usa
> Syracuse, New York, USA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dpbunte at gmail.com
>