[Elecraft] Subject: PA Transistors Maintenance in K2

[Don Wilhelm]

Jan,

If you have the KPA100 and have operated it for more than 5 hours at 
greater than 50 watts, then the answer is YES, take the KPA100 off the 
base K2, remove the shield and tighten the PA mounting screws.  a 1/8 
turn is normally all that it takes.

73,
Don W3FPR

On 10/28/2017 9:19 PM, Jan wrote:
> Having assembled the K2 kit in 1999 ~ over a period of some 6 weeks ~ do 
> you suppose I should recheck the hardware now?